How to create MAC OS X installer ( UNIBEAST METHOD )

How to create MAC OS X installer ( UNIBEAST METHOD )

The things you need to have 
:-8 GB or Larger USB Flash Drive 
:-Install OS X Mountain Lion (Purchase it)
:- MBR patch for MBR installation or u can install in GUID also

Follow the steps to Create a Bootable USB Drive Using UniBeast
1. Insert the USB drive into a USB 2.0 port
2. Open /Applications/Utilities/Disk Utility
3. Highlight the USB drive in the left column
4. Click on the Partition tab
5. Click Current and choose 1 Partition
6. Click Options…
7. Choose Master Boot Record
8. Under Name: type USB or anything (You can rename it later)
9. Under Format: choose Mac OS Extended (Journaled)
10. Click Apply & then Partition
  11. Download and run Unibeast ( )

Note : Make sure to copy the “Mac os x mountain” to 
           Applications and Mount the BaseSystem.dmg  

12. Click Continue thrice & thenAgree

13. At Destination Select, choose USB and click Continue
14. If you R using a Socket 1156 system , then choose ” Legacy USB Support “
15. If you R using a laptop, choose the Laptop Support
16. Click Continue
17. Enter the super user password and click Install
The process will take around 10-15 minutes, depending on the system and drive speed, but
it will show hours. This is normal. Do not unplug or stop during this time.

Install OS X Mountain Lion
1. Turn on the computer and change bios setting For bios setting see older post
2. Press the hot-key to choose boot device Like F12,F9,F2 whatever it is 
3. Choose USB-HDD

4. At the Chimera Boot Screen, choose USB and hit Enter
    if u stuck or can’t boot the installer screen /can’t stand up the installer screen 
   make sure to read this flag  

   Once you done you will see like this

5. When you arrive at the Installer, choose your language.
6. For a new installation of OS X, you MUST format the destination drive according to the following steps before continuing.
a. In the top menu bar choose Utilities, and open Disk Utility
b. Highlight your target hard drive for the Mountain Lion installation in left column.
c. Click Partition tab
d. Click Current and choose 1 Partition or you make any 
e. Click Options…
f. Choose GUID Partition Method or MBR 
g. Under Name: type Mountain Lion (You can rename it later)
h. Under Format: choose Mac OS Extended (Journaled)
i. Click Apply then Partition
j. Close Disk Utility
7. When the installer asks you where to install, choose Mountain Lion, or 
    your existing desired drive..
8. On successful completion, restart the system

Post-Installation Using MultiBeast
1. Turn on the computer
2. Press the hot-key to choose boot device
3. Choose USB-HDD
4. At the Chimera Boot Screen, choose your new Mountain Lion drive.
5. Complete your user account creation
6. When you arrive at the desktop, install MultiBeast 
Choose this 
UserDSDT or DSDT-Free Installation and any further drivers to enable audio, network, graphics, etc… 

like this for 2nd generation Core i series processors 


like this for 3rd generation Core i series processors
Once you done Your Hackintosh is Ready